Category: FASTLOCK CONNECTION
Notes:
The 38000 and 38100 seriesare 2-ways, normally closed valves with FAST LOCK connection system.
OLAB FAST LOCK CONNECTION SYSTEM
100% SAFE, IP67 UL approved
• Can be used for copper or aluminum pipes with low thickness (rigid, semi-rigid and in reel).
A stainless steel reinforcing bush, with a AST patent on its external surface, will be insert inside the hose’s/pipe’s
gauge that needs to be connected on the hose’s external diameter will be place in order: nut, ogives and sealing
O-ring, finally the hose will be inserted to the stop in the chosen place on the junction’s body.
Tightening the nut at the right pair for every hose match, the ogives will move until it places itself at the end of
the junction’s body while pushing the o-ring in the seal location.
Once a battuta, under the effect of the nut’s tightening, the ogives will distort itself incising the external diameter
with its extremity in correspondence of the AST patent, then it will deform the hose until finally lean againist the
patent’s diameter.
Therefore, the O-ring pledges the pressure seal of the connection, the ogives together with the AST patent of the
reinforc-ing bush allow the holding of the hose inside the connection body.
The solenoid valves of 38000 series are designed to be installed on refrigeration and air-conditioning systems using refrigerants of group II, as defined in Article 13, Chapter 1, Point b of Directive 2014/68/EU, with reference to EC Regulation No.1272/2008. Group II include all refrigerants classified as A1 in annex E of EN 378-1:2008 standard. See page 19 for more information about refrigerant fluids compatible.
Solenoid valves can be installed anywhere in the system provided that the cooling capacity of all different models is taken into account. The device must be installed ensuring that the refrigerant flows in the direction shown by the arrows on the valve body. All models of this series can be mounted in all positions except for the one with a coil turned downwards. Brazing of valves to weldable pipes must be carried out using an alloy with low melting point. To avoid damages, make sure the flame is not pointed to the body during pipe welding. Before connecting the device make sure the operating data shown on the coil correspond to those on the system. Please read enclosed leaflet before proceeding with the installation.
The 38000 and 38100 seriesare 2-ways, normally closed valves with FAST LOCK connection system.
OLAB FAST LOCK CONNECTION SYSTEM
100% SAFE, IP67 UL approved
• Can be used for copper or aluminum pipes with low thickness (rigid, semi-rigid and in reel).
A stainless steel reinforcing bush, with a AST patent on its external surface, will be insert inside the hose’s/pipe’s
gauge that needs to be connected on the hose’s external diameter will be place in order: nut, ogives and sealing
O-ring, finally the hose will be inserted to the stop in the chosen place on the junction’s body.
Tightening the nut at the right pair for every hose match, the ogives will move until it places itself at the end of
the junction’s body while pushing the o-ring in the seal location.
Once a battuta, under the effect of the nut’s tightening, the ogives will distort itself incising the external diameter
with its extremity in correspondence of the AST patent, then it will deform the hose until finally lean againist the
patent’s diameter.
Therefore, the O-ring pledges the pressure seal of the connection, the ogives together with the AST patent of the
reinforc-ing bush allow the holding of the hose inside the connection body.
The solenoid valves of 38000 series are designed to be installed on refrigeration and air-conditioning systems using refrigerants of group II, as defined in Article 13, Chapter 1, Point b of Directive 2014/68/EU, with reference to EC Regulation No.1272/2008. Group II include all refrigerants classified as A1 in annex E of EN 378-1:2008 standard. See page 19 for more information about refrigerant fluids compatible.
Solenoid valves can be installed anywhere in the system provided that the cooling capacity of all different models is taken into account. The device must be installed ensuring that the refrigerant flows in the direction shown by the arrows on the valve body. All models of this series can be mounted in all positions except for the one with a coil turned downwards. Brazing of valves to weldable pipes must be carried out using an alloy with low melting point. To avoid damages, make sure the flame is not pointed to the body during pipe welding. Before connecting the device make sure the operating data shown on the coil correspond to those on the system. Please read enclosed leaflet before proceeding with the installation.
